After a fun-filled day on an inflatable water slide, it's time to pack up and store the slide properly. However, one common challenge is dealing with the water that remains inside the slide. This article provides some effective methods for removing water from an inflatable water slide to ensure proper storage and prevent damage.

1 Gravity Draining:
The most straightforward method to remove water from an inflatable water slide is gravity draining. Start by positioning the slide in a slightly elevated area, preferably on a slope. Open the drain valve located at the bottom of the slide and allow the water to naturally flow out due to gravity. This method works best when the slide is partially inflated, as it allows the water to exit more easily.

2 Towel Drying:
For smaller amounts of water or areas that gravity draining cannot reach, towel drying is a practical solution. Begin by blotting the wet areas of the slide with absorbent towels. Press the towels firmly against the surface to soak up as much water as possible. Repeat this process with dry towels until the majority of the water is absorbed.



3 Air Compressor:
If gravity draining and towel drying are insufficient, an air compressor can be used to blow out the remaining water. Ensure that the slide is completely deflated before starting. Attach the air compressor to the slide's inflation valve and set it to a low pressure setting. Gradually inflate the slide, allowing the air to push out the water through the drain valve or other openings.

4 Sun Drying:
After removing as much water as possible, leave the inflatable water slide out in the sun to dry completely. Choose a sunny and well-ventilated area, preferably on a clean and dry surface. Properly spread out the slide to allow air circulation and aid in the evaporation of any residual moisture. Rotate the slide periodically to ensure even drying. Remember to flip it over to dry both sides.



5 Time for Storage:
Once the inflatable water slide is thoroughly dry, it's ready for proper storage. Make sure the slide is completely deflated and fold it neatly according to the manufacturer's instructions. Store it in a cool, dry place away from direct sunlight and sharp objects that could puncture or damage the material.

Properly removing water from an inflatable water slide is crucial to prevent mold, mildew, and damage during storage. By using gravity draining, towel drying, an air compressor, and sun drying techniques, you can effectively remove excess water from the slide. Following these methods will help ensure the longevity and continued enjoyment of your inflatable water slide for future use.